Moments calculator
Reactions at the supports
125 N and 225 N
At 0.5 m: 125 N.
Working
- Forces down: 200 N at 2 m (the beam's weight); 150 N at 3 m (load 1). Total 350 N. A uniform beam's weight acts at its centre.
- Take moments about the support at 0.5 m (clockwise = anticlockwise): R × 3 = 200 × 1.5 + 150 × 2.5 = 675 N m.
- So the reaction at 3.5 m is 675 ÷ 3 = 225 N.
- Resolve vertically: the reaction at 0.5 m is 350 − 225 = 125 N.
- Both reactions are positive, so the beam rests in equilibrium on both supports.
Your result
125 N and 225 N. At 0.5 m: 125 N. At 3.5 m: 225 N.
Practise moments questions
A-level Maths Pro
Get an A* or your money back
£129 once
Price rises to £199 on 1 January. Save £70 by joining before then.
At least 12 months' access
No VAT is charged. Conditions
A 4 m uniform beam weighing 200 N rests on supports 0.5 m and 3.5 m from one end with 150 N at 3 m: taking moments, the reactions are 125 N and 225 N.
Questions people ask
How do you take moments?
A moment is force × perpendicular distance from the pivot. In equilibrium, the total clockwise moment about any point equals the total anticlockwise moment.
Which point should I take moments about?
A point where an unknown force acts, usually a support: that force has no moment about it, so it drops out of the equation.
Where does a uniform beam's weight act?
At its centre. A non-uniform beam's weight acts at its centre of mass, which a question will give or ask for.
What happens when a beam is about to tip?
The reaction at the support it lifts off becomes zero. Set that reaction to 0 and take moments about the other support.
More free tools
Keep going
How we work this out
What it does
Enter a beam, its two supports and the loads to get the reaction at each support, with the moments taken and a diagram.
A rigid beam resting on two supports, with its own weight acting at its centre and up to four point loads.
Method
- Moments are taken about the support nearer the left end: the clockwise moments of the loads equal the anticlockwise moment of the other reaction.
- Resolving vertically, the two reactions add up to the total load.
- A negative reaction means the beam would tip about the other support, and the tool says so.