A-level Physics electricity questions with worked answers
Six exam-style circuit questions, from current and charge to emf and internal resistance.
1 of 6
5 marksCore physics3.5.1.1
Calculator and data booklet allowed
AQA 7408
Spec and skills
Paper scope: 7408/1
Paper scope: 7408/3A
Spec 3.5.1.1
Original practice question
A torch lamp is connected to a battery. The potential difference across the lamp is 3.0 V and the current in it is 0.25 A. The torch is left on for 12 minutes.
Part 1
Calculate the charge that flows through the lamp in 12 minutes.
[2 marks]
Part 2
Calculate the energy transferred by the lamp in this time.
[1 mark]
Part 3
Calculate the resistance of the lamp when it is lit.
[1 mark]
Part 4
Calculate the number of electrons that pass through the lamp in 12 minutes.
[1 mark]
4 marksCore physics3.5.1.1
Calculator and data booklet allowed
AQA 7408
Spec and skills
Paper scope: 7408/1
Paper scope: 7408/3A
Spec 3.5.1.1
Original practice question
The circuit contains a cell, a resistor R and a lamp in series, with two ammeters and a voltmeter. The meters are ideal.
AA1RAA2V
Part 1
State what is meant by a potential difference of 1 volt between two points.
[1 mark]
Part 2
A1 reads 0.40 A. Explain why A2 also reads 0.40 A even though the lamp transfers energy.
[2 marks]
Part 3
The voltmeter reads 1.8 V. Calculate the resistance of the lamp.
[1 mark]
6 marksCore physics3.5.1.4
Calculator and data booklet allowed
AQA 7408
Spec and skills
Paper scope: 7408/1
Paper scope: 7408/3A
Spec 3.5.1.4
Original practice question
A 9.0 V battery of negligible internal resistance is connected to the network shown.
9.0 V2.0 Ω4.0 Ω12 Ω
Part 1
Calculate the total resistance of the network.
[2 marks]
Part 2
Calculate the current in the 12Ω resistor.
[3 marks]
Part 3
Calculate the power dissipated in the 2.0Ω resistor.
[1 mark]
5 marksCore physics3.5.1.5
Calculator and data booklet allowed
AQA 7408
Spec and skills
Paper scope: 7408/1
Paper scope: 7408/3A
Spec 3.5.1.5
Original practice question
A temperature sensor uses an NTC thermistor in series with a 2.0kΩ resistor across a 9.0 V supply of negligible internal resistance. The output is taken across the thermistor. At 20∘C the thermistor's resistance is 4.0kΩ; at 60∘C it is 1.0kΩ.
9.0 V2.0 kΩVout
Part 1
Calculate the output voltage at 20∘C.
[1 mark]
Part 2
Calculate the output voltage when the temperature rises to 60∘C.
[2 marks]
Part 3
Explain why the output voltage changes in this way.
[2 marks]
5 marksCore physics3.5.1.6
Calculator and data booklet allowed
AQA 7408
Spec and skills
Paper scope: 7408/1
Paper scope: 7408/3A
Spec 3.5.1.6
Original practice question
A battery of emf 6.0 V and internal resistance 1.0Ω is connected to a 5.0Ω resistor.
Part 1
Calculate the current in the circuit.
[1 mark]
Part 2
Calculate the terminal pd of the battery.
[1 mark]
Part 3
Calculate the percentage of the energy supplied by the battery that is transferred in the external resistor.
[2 marks]
Part 4
State what is meant by the emf of a source.
[1 mark]
7 marksUnfamiliar contextPractical: RP063.5.1.6
Calculator and data booklet allowed
AQA 7408
Spec and skills
Paper scope: 7408/1
Paper scope: 7408/3A
Spec 3.5.1.6
Original practice question
A student is asked to find the emf and internal resistance of a 4.5 V battery made of three cells, which has an internal resistance of about 1Ω.
Part 1
Describe a method the student could use, including the circuit, the measurements, how the data are processed to find the emf and internal resistance, and any steps taken to make the experiment safe and the results reliable.
[6 marks]
Part 2
The student finds that the line of best fit on the graph curves downwards at large currents. Suggest an explanation.
What is the equation for emf and internal resistance?
ε = I(R + r), or ε = V + Ir: the emf equals the terminal potential difference plus the 'lost volts' across the internal resistance.
How do resistors combine?
In series, R = R₁ + R₂ + …. In parallel, 1/R = 1/R₁ + 1/R₂ + …, so the total is less than the smallest resistor.
How does a potential divider with a thermistor work?
The supply p.d. splits in the ratio of the resistances. As an NTC thermistor warms, its resistance falls, so its share of the p.d. falls and the fixed resistor's share rises.